Welded Mesh for Construction uses HPB300 or HRB400/500 grade steel. The product has a tensile strength of not less than 490MPa and is available with surface treatments such as black wire, galvanizing (zinc layer ≥40μm), or epoxy coating, conforming to national and international standards such as ASTM. Customization based on engineering drawings is supported, and anti-corrosion treatment can be applied as needed.
Product Parameters
|
Material |
Low carbon steel wire, galvanized wire, stainless steel wire, black iron wire |
|
Mesh |
5×5cm ~ 10×20cm, customization available. |
|
size |
1×2m, 1×3m, 2×3m, etc., customization available. |
|
Wire diameter |
1.5mm to 10mm; the thicker the wire, the better the load-bearing capacity. |
|
Welding process |
Resistance welding: The shear strength of the weld joint is ≥ 0.3 times the tensile strength of the steel wire. |
|
Surface treatment |
Black steel wire (can be galvanized or epoxy coated) Galvanized layer thickness ≥40μm (optional) |
|
Implementation standards |
Chinese National Standard GB/T 1499.3 / British Standard BS 4483 / American Standard ASTM A185/A497 |
Product Advantages
Improved Construction Efficiency
Welded Mesh for Construction Standardized and rapid installation saves over 50% of labor time compared to on-site tying.
Cost Savings
Optimized reinforcement design can reduce steel reinforcement usage by up to 20%, virtually eliminating on-site waste.
Stable Quality
Fully automated production ensures precise mesh dimensions and consistent weld strength.
Global Standards
Strictly complies with mainstream international standards such as GB, ASTM, and EN, ensuring smooth project acceptance.
Main Applications
Building Construction
Primarily used for standardized reinforcement of cast-in-place structures such as concrete slabs and walls, replacing traditional manual rebar tying.
01
Roads and Bridges
Used for steel reinforcement of highway and bridge deck paving layers, improving the crack resistance and load-bearing capacity of concrete pavements.
02
Municipal Facilities
Applied to concrete structural layers of underground structures such as comprehensive utility tunnels and drainage ditches, enhancing overall integrity.
03
Industrial Sector
Provides crack-resistant steel mesh layers for high-load floors in factories and warehouses, preventing floor cracking and settlement.
04
Why Choose Binze
Binze is not only a manufacturer but also your solution partner in the field of concrete structure reinforcement engineering. With 17 years of industry experience, we deeply understand every aspect from design to construction.
Clear Standards
Welded Mesh for Construction Strictly complies with mandatory certifications in your target market (such as CE, ASTM), and provides a complete set of compliance documents to ensure zero delays in customs clearance and undisputed acceptance.
On-Time Delivery
We track order progress daily and can flexibly adjust the shipping sequence according to your construction plan, ensuring close coordination between material supply and on-site progress.
Transparent Pricing
While providing competitive ex-factory prices, we can optimize design solutions to reduce material consumption and provide integrated logistics suggestions to effectively control total project costs.
Dedicated Contact, Direct Response
Your order is assigned a dedicated account manager from the start, providing efficient single-point communication from technical confirmation to after-sales support, ensuring that problems are responded to and resolved immediately.
FAQ
Q: Compared to traditional manual rebar tying, how much can using welded wire mesh shorten the construction period?
A: It can reduce rebar installation time by an average of 50%-70%. Taking a standard floor as an example, using welded wire mesh can reduce the number of on-site rebar workers by approximately 60%.
Q: How is the dimensional accuracy of the product guaranteed?
A: The wire mesh is manufactured using CNC welding equipment, and the mesh spacing deviation is controlled within ±2mm.
Q: Does the product have international certification?
A: Our products have passed CE certification (compliant with EN ISO 17660 standard) and we can provide test reports conforming to mainstream international standards such as British BS 4483, American ASTM A185/A497, and Australian AS/NZS 4671.
Hot Tags: welded mesh for construction, China welded mesh for construction manufacturers, suppliers, factory, welded steel wire mesh, 4x4 welded wire mesh for concrete, welded gabion mesh, brc fencing mesh panel, ss welded wire mesh, electro galvanized welded wire mesh
